THE CLASSIFICATION OF CROSS-STRATIFIED UNITS. WITH NOTES ON THEIR ORIGIN   总被引：5，自引：0，他引：5  

J. R. L. ALLEN 《Sedimentology》1963,2(2):93-114

  相似文献   

ON BED FORMS AND PALAEOCURRENTS     

J. R. L. ALLEN 《Sedimentology》1966,6(3):153-190

Bed forms arise by interaction between a fluid flow and the sediment transported over or close to the bed. The geometry of bed forms is two-dimensional or three-dimensional. Two-dimensional bed forms generate two-dimensional internal sedimentary structures and are adjusted to two-dimensional flow-vector fields. Three-dimensional bed forms generate three-dimensional internal sedimentary structures and are adjusted to three-dimensional flow-vector fields. Many shallow-water flow systems observable today are each characterised by flow-vector fields of unequal rank, and hence are hierarchically structured. Hierarchies of bed forms and internal structures which parallel the hierarchies of flow-vector fields can also be established in the case of these flow systems. A single type of bed form or internal structure from an hierarchically structured flow system cannot specify that system fully with regard to either its directional or flow-dynamic characteristics. An approach to palaeocurrent analysis that is more flexible and comprehensive than previously attempted may therefore be desirable.  相似文献   

Features of cross-stratified units due to random and other changes in bed forms   总被引：1，自引：0，他引：1  

J. R. L. ALLEN 《Sedimentology》1973,20(2):189-202

Because cross-stratified units depend upon the movement of bed forms, any change in the shape, size and direction of travel of the forms is reflected in the geometry of the units, notably in their relative length, breadth and thickness, mode of termination upstream and downstream, and internal discontinuities. Most models of cross-stratification so far published are unsatisfactory because they ignore the fact that real bed forms are subject to change. The changes are thought to occur at two levels of detail independently. Those at the coarser level depend on the essential non-uniformity, unsteadiness and multi-directionality of natural flows, when assessed on a suitably large scale. At the finer level, change is related to the random behaviour of individual bed forms as they interact with the adjacent flow, and it proceeds even when the flow is an equilibrium one overall. Flume experiments on current ripples show that many features of cross-stratified units can be explained by the random behaviour of bed forms. The finite streamwise length of such units, and their upstream and downstream erosional termination, is governed by the life-span (finite) of individual ripples and by the extent of net deposition on the bed. Internal discontinuities, closely resembling features described as reactivation structures, were also found to depend on the relative motion of ripples, no change of flow discharge and stage being involved. The degree of relative motion in the ripple assemblages was substantial, as measured by the fluctuating component of the ripple celerity.  相似文献   

复杂大地震分析和龙陵地震震源过程   总被引：1，自引：0，他引：1       下载免费PDF全文

周蕙兰  Hiroo Kanamori  Clarence R.Allen 《地球物理学报》1984,27(6):523-536

本文发展了Kikuchi和Kanamori的P波反演方法,使之适应于多断层活动和破裂在断层面上沿任意方向传播的情况,并用来研究了1975年5月29日龙陵第一大震的震源过程。结果表明,该震是由一个以走滑错动为主的主断层（走向150°）和另一个走向相同但作垂直倾滑错动的次断层同时活动引起的。在主断层和次断层上分别分布有6个和4个子地震。这种多重破裂和破裂传播的方向性效应,使龙陵地震P波波形和震源过程非常复杂。  相似文献   

Volcanic Rocks from the Nejapa and Granada Cinder Cone Alignments, Nicaragua, Central America     

WALKER  JAMES ALLEN 《Journal of Petrology》1984,25(2):299-342

Mafic tholeiitic basalts from the Nejapa and Granada (NG) cindercone alignments provide new insights into the origin and evolutionof magmas at convergent plate margins. In comparison to otherbasalts from the Central American volcanic front, these marietholeiitic basalts are high in MgO and CaO and low in Al₂O_p,K₂O₁, Ba and Sr. They also differ from other Central Americanbasalts, in having clinopyroxene phenocrysts with higher MgO,CaO and Cr₂O₃ concentrations and olivine phenocrysts with higherMgO contents. Except for significantly higher concentrationsof Ba, Sr and ⁸⁷Sr/₈₆Sr, most of the tholeiites are indistinguishable in compositionfrom mid-ocean ridge basalts. In general, phenocryst mineralcompositions are also very similar between NG tholeiites andmid-ocean ridge basalts. The basalts as a whole can be dividedinto two groups based on relative TiO₂-K₂O concentrations. Thehigh-Ti basalts always have the lowest K₂O and Ba and usuallyhave the highest Ni and Cr. All of the basalts have experienced some fractional crystallizationof olivine, plagioclase and clinopyroxene. Relative to otherCentral American basalts, the Nejapa-Granada basalts appearto have fractionated at low P_T and P_H2O. The source of primarymagmas for these basalts is the mantle wedge. Fluids and/ormelts may have been added to the mantle wedge from hydrothermally-altered,subducting oceanic crust in order to enrich the mantle in Sr,Ba and ⁸⁷Sr/⁸⁶Sr, but not in K and Rb. The role of lower crustaicontamination in causing the observed enrichments in Sr, Baand ⁸⁷Sr/⁸⁶Sr of NG basalts in comparison to mid-ocean ridgebasalts, however, is unclear. Rutile or a similar high-Ti accessoryphase may have been stable in the mantle source of the low-TiNG basalts, but not in that of the high-Ti basalts. Mafic tholeiiticbasalts, similar to those from Nejapa and Granada, may representmagmatic compositions parental to high-Al basalts, the mostmafic basalts at most Central American volcanoes. The characterof the residual high-Al basalts after this fractionation stepdepends critically on P_H2O Both high and low-Ti andesites are also present at Nejapa. Likethe high-Ti basalts, the high-Ti andesites have lower K₂O andBa and higher Ni and Cr in comparison to the low-Ti group. Thehigh-Ti andesites appear to be unrelated to any of the otherrocks and their exact origin is unknown. The low-Ti andesitesare the products of fractional crystallization of plagioclase,clinopyroxene, olivine (or orthopyroxene) and magnetite fromthe low-Ti basalts. The eruption that deposited a lapilli sectionat Cuesta del Plomo involved the explosive mixing of 3 components:high-Ti basaltic magma, low-Ti andesitic magma and high-Ti andesiticlava.  相似文献   

Evolution and mechanics of a Miocene tidal sandwave   总被引：3，自引：0，他引：3  

P. A. ALLEN  P. HOMEWOOD† 《Sedimentology》1984,31(1):63-81

A remarkable exposure of Miocene marine molasse in western Switzerland records the evolution of a tidal sandwave over a period of approximately 2 1/2 months. The sandwave is composed of tidal ‘bundles’ in which a sandwave reactivation stage and full vortex stage can be recognized for the dominant flow (ebb tide) and a rippled flood apron overlain by high water drape for the reversed flow. Bundle thicknesses vary systematically through neap–spring cycles, with a periodicity of 27 demonstrating the semi-diurnal lunar control of sedimentation. Waves were an additional component, especially when superimposed on flood tides, producing near-symmetrical combined-flow ripple marks in the flood apron. Tidal current velocities are estimated using critical shear velocities for entrainment, the ripple-dune transition and the dune-plane bed transition. Using appropriate estimates of roughness lengths and a logarithmic velocity law, maximum tidal speeds at 1 m above the bed were approximately 0·6 m sec^?1 for ebbs and up to 0·5 m sec^?1 for floods. The enhancement by waves of bed shear stress (τ_wc/τ of approximately 2 for 1 m high waves) under flood currents implies flood tidal velocities closer to 0·2–0·3 m sec^?1. Peak instantaneous bedload sediment transport rates using a modified Bagnold equation are nearly 5 times greater under ebb tides than floods. The average net sediment transport rate at springs (0·04 kg m^?1 sec^?1) is over 10 times greater than at neaps (0·002 kg m^?1 sec^?1). Comparison with transport rates in modern tidal environments suggests that the marine molasse of Switzerland was deposited under spatially confined and relatively swift tidal flows not dissimilar to those of the present Dutch tidal estuaries.  相似文献   

The Saharan debris flow: an insight into the mechanics of long runout submarine debris flows   总被引：6，自引：0，他引：6  

GEE  MASSON  WATTS  & ALLEN 《Sedimentology》1999,46(2):317-335

New 3·5 kHz profiles and a series of piston cores from the north-west African margin provide evidence that the Saharan debris flow travelled for more than 400 km on a highly fluid, low-friction layer of poorly sorted sediment. Data suggest that the Saharan debris flow is a two-phase event, consisting of a basal, volcaniclastic debris flow phase overlain by a pelagic debris flow phase. Both phases were emplaced on the lower continental rise by a single large debris flow at around 60 ka. The volcaniclastic flow left a thin deposit less than 5 m thick. This contrasts with the much thicker (over 25 m) deposit left by the pelagic debris flow phase. We suggest that pelagic sediment, sourced and mobilized as debris flow from the African continental margin, loaded and destabilized volcaniclastic material in the vicinity of the western Canaries. When subjected to this loading, the volcaniclastic material appears to have formed a highly fluid sandy debris flow, capable of transporting with it the huge volumes of pelagic debris, and contributing to a runout distance extending over 400 km downslope of the Canary Islands on slopes that decrease to as little as 0·05°. It is likely that the pelagic debris formed a thick impermeable slab above the volcanic debris, thus maintaining high pore pressures generated by loading and giving rise to low apparent friction conditions. The distribution of the two debris phases indicates that the volcaniclastic debris flow stopped within a few tens of kilometres after escaping from beneath the pelagic debris flow, probably because of dissipation of excess pore pressure when the seal of pelagic material was removed.  相似文献   

SEDIMENT SIZE DISTRIBUTION PROFILE ON THE CONTINENTAL SHELF OFF NEW JERSEY1     

JESSIE G. DONAHUE  ROBERT C. ALLEN  BRUCE C. HEEZEN 《Sedimentology》1966,7(2):155-159

A series of samples from the continental shelf off New Jersey reveals a continuous surface layer of fine sand overlying a variety of sediment type. Ripples and shell debris suggest the fine sand is reworked and is in adjustment with the present shelf environment.  相似文献   

Metamorphic evidence for an inverted crustal section, with constraints on the Main Karakorum Thrust, Baltistan, northern Pakistan   总被引：1，自引：0，他引：1  

T. ALLEN  C. P. CHAMBERLAIN 《Journal of Metamorphic Geology》1991,9(4):403-418

Abstract The Shyok Suture Zone separates rocks in the Asian plate from rocks in the Kohistan-Ladakh island arc. In Baltistan, this suture has been reactivated by the late 'break-back'Main Karakorum Thrust (MKT). The P-T histories of metamorphic rocks both north and south of the MKT have been determined in an effort to place constraints on the tectonic history of this zone. The terranes north and south of the MKT have different, unrelated metamorphic histories. Rocks from the Kohistan-Ladakh island arc south of the MKT have undergone a static low- P (2–4 kbar, c. 500° C) thermal metamorphism. The P-T paths and metamorphic textures of these rocks are consistent with metamorphism due to emplacement of plutonic rocks into the island arc. This metamorphism pre-dates folding and deformation of these rocks. Rocks in the Karakorum Metamorphic Complex, north of the MKT, have experienced a complex deformational and metamorphic history. Prograde metamorphic isograds have been deformed by subsequent south-verging folding and by gneiss dome emplacement. However, decompression metamorphic reactions occurred during nappe emplacement. Higher pressure rocks are associated with higher level nappes, creating an inverted pressure metamorphic sequence (8–9-kbar rocks over 5–6-kbar rocks). There is little variation in temperature with structural level (550–625° C). These two different terranes have been juxtaposed after metamorphism by the late south-directed MKT.  相似文献   

Packing and resistance to compaction of shells     

J. R. L. ALLEN 《Sedimentology》1974,21(1):71-86

The separated valves of bivalve molluscs, certain gastropods, and many brachiopods closely resemble the regular geometrical form known as the shell. The packing concentration of natural accumulations of such organic shells may be placed within bounds with the aid of packing models making use of ordered arrangements of equal geometrical shells, either conical, cylindrical or spherical. The low packing concentrations, comparable with 0·1–0·2, indicated by these models are confirmed by experiments using the shells of four common British species of bivalve or gastropod mollusc. Packings of these shells have a substantial intrinsic strength, and experimentally appear able to support without failing sedimentary overburdens equivalent to loads comparable with 1000 kg mass/m². The observed and predicted low packing concentrations suggests that natural shell beds can hold relatively very large amounts of pore fluids or mineral cements. The resistance to compaction of the packings means that the high original porosities of natural shell beds have a good chance of being permanently preserved.  相似文献